Lenco Freeride SmartCraft Junction Cable, 60″ (15203-101)

Lenco Freeride SmartCraft Junction Cable, 60″

Connect your Lenco Freeride light-duty trim tab system to a Mercury SmartCraft engine network with this 60-inch junction cable. The mid-length option in the Freeride SmartCraft junction lineup, it provides the interface between the trim tab controller and the vessels SmartCraft bus suited to installations where the controller and SmartCraft connection point are separated by a moderate distance, such as across a helm console or through a short bulkhead run.

At 60 inches (5 feet), this cable covers the majority of standard single-station helm installations where the 36″ cable falls short but the full 120″ run isnt needed, keeping the installation tidy without excess cable.

Key Features

• 60″ (152 cm) SmartCraft junction cable for Lenco Freeride light-duty trim tab systems
• Integrates Freeride trim tab controller with Mercury SmartCraft engine networks
• Mid-length option ideal for standard helm console runs where 36″ is too short
• OEM Lenco part (15203-101) direct replacement or add-on for Freeride installations
• Marine-rated construction for permanent onboard installation

In the Box

• (1) Freeride SmartCraft Junction Cable, 60″ / 152 cm (15203-101)

Other Junction Cable Lengths

Choose the length that suits your installation routing:

• Lenco Freeride SmartCraft Junction Cable, 36″ (15202-101) for close-proximity installations
• Lenco Freeride SmartCraft Junction Cable, 120″ (15204-101) for long runs and larger vessel layouts

Parts Desk Insights

Best Use Case: The 60″ cable is the most versatile length in the Freeride SmartCraft junction lineup and the right choice for most standard single-station helm installations long enough to route across a typical helm console or through a short bulkhead, but not so long that excess cable becomes a management issue. If the customer is unsure which length they need, the 60″ is a safe default recommendation for a typical center console or cuddy cabin installation. For very tight runs (controller directly adjacent to the SmartCraft junction), see the 36″ cable (15202-101). For larger vessels or long routing runs, see the 120″ cable (15204-101).

Mercury SmartCraft Only: This cable is designed for Mercury SmartCraft engine networks. It is not compatible with other engine network protocols (e.g., NMEA 2000, Yamaha CL, Suzuki SDS). Confirm the customers engine brand and network type before ordering.

Freeride Series Only: Confirm the customer has a Freeride light-duty trim tab system, not a Pro Control system. The two product families use different network architectures and cables are not interchangeable.