Trident 1014-1415-20 LPG Pigtail Hose with Quick-Closing Coupling

Trident 1014-1415-20 LPG Pigtail Hose with Quick-Closing Coupling

Keep your onboard propane system running safely and reliably. This 20″ high-pressure pigtail hose connects your wall-mount regulator to a Type 1 propane cylinder (outside right-hand threads), with a thermoplastic QCC nut that threads on by hand no tools required. The quick-closing coupling automatically blocks gas flow if the connection isn’t fully made, and a built-in heat sensor shuts off flow if temperatures reach 240300F. A downstream flow limiter activates automatically if a break occurs in the gas line, restricting flow to protect your system.

• 20″ high-pressure hose with 1/4″ male inverted flare fitting
• Thermoplastic QCC nut hand-tight, tool-free connection to Type 1 valves
• No gas flow unless fully connected built-in safety interlock
• Heat-sensing shutoff activates at 240300F
• Controlled flow device limits downstream flow to 10 CFH at 100 PSI if a line break occurs (activates at 200 Cu Ft/Hr)
• Fully assembled and leak tested
• UL Listed

Parts Desk Insights

This hose is the right choice when you’re connecting a wall-mount regulator to a standard Type 1 (QCC) propane cylinder the most common setup on cruising sailboats and powerboats with built-in galley systems. The quick-closing coupling makes cylinder swaps fast and safe, with no risk of forgetting to shut off the valve first. If you’re building out or replacing a full propane system, pair this hose with a Trident Single-Stage Wall Mount Regulator or Two-Stage Wall Mount Regulator, and run it to your appliance with a Trident LPG Supply Line Hose. For a direct cylinder-to-grill connection without a wall-mount regulator, see the Trident 1014-1401-20 Pigtail Hose instead.