Torqeedo Solar Charge Controller for Power 48-5000

Torqeedo Solar charge controller specially adapted to the Power 48-5000 battery.FeaturesMakes it possible to charge the Power 48-5000 with solar energy (solar panels not included)Switches the system on by itself when there is enough sunlightThe integrated MPPT maximizes the energy output of the solar modules during charging with very high efficiencyUp to 6 solar charge controllers can be connected in parallelAlso charges the batteries while drivingOnly compatible with TorqLink motorsSolar charging for systems with non-TorqLink motors is only possible with Power 24-3500 as a drive battery and solar charge controller (2207-00) or solar quick charge controller (2211-00)Compatible with the Power 48-5000 quick charger (2212-00)Not compatible with the Power 48-5000 charger (2213-00)In the BoxCharge controller incl. battery cable with fuseSpare fuseCrimp connector (2 pieces)Heat-shrink tubing (with adhesive, 2 pieces, each approx. 6 cm)TorqLink T cableSpecificationsMaximum module rated current (Imp): 8 AMaximum module short-circuit current (Isc): 9 AMinimum module voltage: 12 VMaximum module nominal voltage @ STC (Vmp): 40.8 VMaximum module open-circuit voltage (Voc): 48 VMaximum module power: 325 WpParallel connection up to 6 charge controllers in parallelCharge cut-off voltage: 49.5 VMaximum efficiency: 99%Operating point efficiency: 96 to 99%Standby consumption: < 1 mAIP code Charge controller (without fuse holder): Protected from immersion IP67Fuse holder: Protected from water spray IP64Solar module connection: Cable not preassembledColour coding: Yellow = plus, black = minusCable length approx: 0.15 mBattery connection: Ring cable lug M8/red for positive pole, M10/black for negative poleCable length approx: 1.5 mData connection TorqLink socket on the unitTorqLink: T-cable included in scope of supplyCable length approx: 0.9 mDimensions: 180 mm 82 mm 56 mmWeight: 720 g