Dometic CH5310P Single MT-3 Binnacle Control | Dual Function Lever | Top Mount

Dometic CH5310P Single MT-3 Binnacle Control

• Part Number: CH5310P
• Brand: Dometic
• Official Product Type: Single-Lever Top-Mount Binnacle Engine Control
• Mount Style: Top mount (binnacle)
• Lever Configuration: Single lever, dual function (combined throttle and shift)
• Neutral Safety Switch: Included
• Warm-Up Feature: Yes allows engine warm-up in neutral before engaging drive
• Compatible Cable Types: 3300/33C (single and dual lever) 4300/43 type (single lever only)
• Supersedes / Replaced By: Confirm with current Dometic catalog verify CH5310P is current for your application
• System: Engine throttle and shift control

What This Control Does

The Dometic CH5310P is a single-lever top-mount binnacle control combining throttle and shift function in one handle. Classic binnacle styling suits a wide range of helm installations. The dual-function lever controls both throttle and gear selection through a single cable connection, keeping the helm clean and the operation intuitive. A built-in neutral safety switch prevents accidental starting in gear, and the engine warm-up feature lets you bring the engine to operating temperature in neutral before engaging the drive.

This model features longer shift travel than earlier MT-3 controls, which improves cable compatibility for certain MerCruiser sterndrive applications and installations with longer cable runs or multiple bends.

Compatible Applications

• Single-engine installations using a top-mount binnacle control
• MerCruiser sterndrive applications specifying a single dual-function lever control (particularly those requiring longer shift travel)
• Mercury Marine and compatible inboard/sterndrive engine installations
• Helm installations using 3300/33C or 4300/43 type control cables

Confirm cable type, engine manufacturer shift-and-throttle cable requirements, and helm cutout dimensions before ordering.

Cable Compatibility

• 3300/33C cables: Compatible with both single and dual lever MT-3 configurations
• 4300/43 type cables: Compatible with single lever only

Use the correct cable type for your engine and cable run. Cable length and routing must be confirmed for the specific installation.

Key Features

• Classic binnacle styling for a clean helm appearance
• Single dual-function lever one handle for both throttle and shift
• Neutral safety switch prevents engine start in gear
• Engine warm-up function run in neutral at elevated RPM before engaging drive
• Extended shift travel for MerCruiser compatibility and longer cable runs with multiple bends
• Top-mount installation

Installation Notes

• Confirm helm cutout dimensions match the MT-3 binnacle footprint before cutting
• Route cables with attention to minimum bend radius longer shift travel helps where bends are required
• Connect the neutral safety switch wiring per the engine manufacturers wiring diagram
• Adjust cable travel at the engine end per the engine service manual
• Verify full throttle and full shift engagement before sea trial
• Follow Dometic installation instructions for final adjustment and safety checks

Technical FAQ

What is the difference between a dual-function lever and separate throttle and shift levers?
A dual-function lever combines throttle and shift into a single handle. Pushing forward shifts into forward gear and advances throttle simultaneously; pulling back shifts into reverse. Separate-lever systems control throttle and shift independently, which some commercial or twin-engine applications require.

Why does this model have longer shift travel?
Longer shift travel was added to improve compatibility with certain MerCruiser sterndrive shift systems and to provide better cable actuation in installations with long cable runs or multiple routing bends. If earlier MT-3 controls produced incomplete shifts in your application, this model is worth confirming against the installation specifications.

Can I use 4300/43 cables instead of 3300/33C?
The CH5310P in single-lever configuration supports both 3300/33C and 4300/43 type cables. In dual-lever configurations, only 3300/33C cables are supported. Confirm the cable type required by your engine before purchasing cable.

Does this control work with twin-engine installations?
This is a single-station, single-engine control. Twin-engine installations require a dual-lever control or two separate single-lever units. Contact Dometic or your dealer for multi-engine configuration options.

Parts Desk Insights

The CH5310P is the right choice for single-engine helm upgrades or replacements where a clean binnacle look and reliable single-lever operation are the priority. The most common issue is cable compatibility customers sometimes order 4300/43 cables expecting full compatibility, but that cable type only works in the single-lever configuration. Confirm the cable type and run length before ordering cables. If the previous control produced sloppy or incomplete shifts, the extended shift travel on this model is a genuine improvement, particularly on MerCruiser sterndrive applications.