Navico Fuel Flow Sensor

Fuel Flow Sensor for Gasoline only. One required per engine. Up to 3 engines supported.Specifications Cable Length: 10 Ft Fuel Line Diameter: 3/8″ (9.5 mm) Inside Diameter Flow Rate Measured: Optimized for 0.6-45 Gal/hr, but can measure outside these values Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line Package: The Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clamps Fuel Type: Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems. Hole required to route through a bulkhead: 22mm (7/8″) Multiple Fuel Flow sensors possible: YesInformation Outputs Fuel FlowTank Fuel Used Trip Fuel UsedSeasonal Fuel UsedIn the BoxFuel Flow SensorNMEA2000 Tee Connector