Raymarine RealVision 3D Y-Cable 0.3m | 152-A80478

Raymarine RealVision 3D Y-Cable A80478

The Raymarine A80478 is a short 0.3m Y-cable designed for use with Raymarine RealVision 3D transducers. It splits a single RealVision 3D transducer connection into two outputs, allowing the transducer signal to be shared between compatible Raymarine devices. The compact 0.3m length keeps the cable run tight and tidy at the installation point, minimising slack at the transducer connection.

Compatible with Raymarine RealVision 3D transducers including the RV-100 All-In-One Transom Mount Transducer, RV-200 Bronze All-In-One Thru-Hull Transducer, RV-212 Bronze Thru-Hull Transducer Pair, RV-220 Bronze Thru-Hull Transducer Pair, RV-312 Plastic Thru-Hull Transducer Pair, and RV-320 Plastic Thru-Hull Transducer Pair.

If you need to connect a RealVision 3D transducer alongside an Airmar CP370-style transducer to an Axiom RV chartplotter, see the Raymarine RealVision 3D Y-Cable Adapter 152-A80492 instead, which handles different connector types.

Best Use Case

Ideal for RealVision 3D installations where the transducer signal needs to be split to feed two compatible Raymarine devices from a single transducer for example, sharing sonar data between a chartplotter and a sonar module. The short 0.3m length suits installations where the split point is close to the transducer or display unit.

Key Features

• 0.3m Y-cable splits one RealVision 3D transducer connection into two outputs
• Compatible with Raymarine RealVision 3D (RV-series) transducers
• Compact length keeps cable runs clean at the connection point
• Plug-and-play no tools or additional hardware required

Parts Desk Insights

• Best use case: Splitting a RealVision 3D transducer signal between two compatible Raymarine devices in a tight installation where a short cable run is preferred
• Not an adapter cable: This Y-cable works within the RealVision 3D connector ecosystem it does not convert between different connector types. For connecting an RV transducer and an Airmar CP370 transducer to an Axiom RV simultaneously, use the A80492 Y-Cable Adapter instead
• Compatible transducers: Works with RV-series RealVision 3D transducers confirm your specific transducer model is RealVision 3D compatible before ordering
• Cable length: 0.3m plan your installation to ensure the split point is within reach; for longer runs, additional extension cabling may be required
• SKU: 152-A80478