Rocna Original Anchor – Galvanised

The Rocna Anchor is a trusted and tried primary anchor that consistently tests ahead on many other premium anchors.It is a true multi-purpose anchor that sets and holds in most sea beds, from soft mud to hard sand and clay, and its chisel ended fluke easily penetrates grasses and sea weeds.New Generation DesignRocna has led worldwide anchor tests as published in the likes of SAIL, Yachting Monthly, Practical Boat Owner, Voile, and others.Because of the Rocnas reliable and convincing performance against its competition, Rocna is trusted to be rock solid in the real world.You dont need to take our word for it.Precision Setting & RockSolid Holding PowerThe distinctive Rocna Roll-bar (A)ensures that the anchor always arrives at the ideal angle for penetration, and thesetting skids (B)guide thefluke tip (C) which acts as a sharp chisel cutting into the seabed.With a third of the anchors weight on its fluke tip, an instant reliable set is ensured with every use.Of all anchor types, aconcave fluke(D) gives the greatest resistance, and through clever design, Rocna provides the largest fluke area possible.In very soft seabeds, this provides the holding power to secure your boat. On hard or weedy sea floors, Rocnas chisel tip(C)ensures that it cuts through and bites deep.Of all anchor types, a concave fluke(D) gives the greatest resistance, and through clever design, Rocna provides the largest fluke area possible.In very soft seabeds, this provides the holding power to secure your boat.On hard or weedy sea floors, Rocnas chisel tip (C)ensures that it cuts through and bites deep.A size to suit all vesselsRocna anchors are available in 14 sizes from 4 kg (9 lb) 275 kg (606 lb) to suit all vessels from small boats to small ships.Sizes up to 33 kg are stocked normally and sizes above are to orderVideoPlease go to our Video Tab and take a look at the excellent presentation that fully explains the amazing design and features of the Rocna AnchorAnchor Sizing GuideThis Guide covers both the Rocna Original and Vulcan Anchors.To choose the correctly sized Rocna or Vulcan anchor, find your vessels length from the column on the left, then track across that row until you find the first column with a displacement (in tonnes) the same or larger than the displacement of your vessel.The top of the column with the selected displacement indicates the recommended Rocna or Vulcan anchor.Rocba’s Anchor Sizing is ConservativeUnlike other manufacturers, Rocna’s anchor sizing recommendations are intended to provide an anchor adequate for use in most all conditions.They base their calculations on 50 knots of wind, associated surge, and poor holding bottoms.This chart is a guideline only, vessel owners should satisfy themselves that their choice of anchor is sufficient and suitable.Should further help be needed please contact our sales team.