Solas Rubex RBX-104B Interchangeable Hub Kit E-Series (17015304)

Solas Rubex RBX-104B Interchangeable Hub Kit E-Series

The Solas Rubex RBX-104B is a complete interchangeable hub kit designed for use with Rubex E-Series propeller housings. It delivers a secure, chatter-free connection between your propeller and outboard, with built-in shock absorption to protect your engine and lower unit during gear shifts or underwater impacts.

The Rubex systems key advantage is interchangeability if your propeller housing is damaged, you keep the hub and only replace the housing, saving significant cost over buying a complete propeller assembly.

Key Features

• Eliminates hub chatter and vibration seats precisely into the propeller hub cavity for a solid, quiet connection
• 10 deflection design cushions gear-shift shock and impact from submerged objects, reducing drivetrain stress
• Hub will not spin in the propeller positive engagement prevents slippage under load
• Reusable after propeller damage if the prop housing is destroyed, the hub can often be recovered and reused
• Rubber construction no plastics to crack or deteriorate over time
• Anodized aluminum splines corrosion-resistant for saltwater and freshwater use (some configurations available in bronze)
• One-piece construction fewer parts, simpler installation
• Interchangeable with Mercury Flo-Torque and Michigan Vortex propellers
• All necessary hardware included

Compatibility

Designed for Rubex E-Series propeller housings. Verify your engine and drive application using the Solas Rubex application chart at rubexprops.com before ordering.

Related Hub Kits

• Solas Rubex RBX-102B Interchangeable Hub Kit E-Series
• Solas Rubex RBX-203B Interchangeable Hub Kit E-Series
• Solas Rubex RBX-203X Interchangeable Hub Kit E-Series
• Solas Rubex RBX-127 Interchangeable Hub Kit E+ Series

Compatible Rubex Propellers

• Rubex L3 Aluminum 14″ x 9″, RH Rotation (9411-140-09)
• Rubex L3 Aluminum 14″ x 11″, RH Rotation (9411-140-11)
• Rubex L3 Aluminum 13.5″ x 15″, RH Rotation (9411-135-15)
• Rubex L3 Aluminum 13.2″ x 19″, RH Rotation (9411-132-19)
• Rubex L3 Aluminum 13.2″ x 21″, RH Rotation (9411-132-21)

Parts Desk Insights

The RBX-104B covers a different engine application than the RBX-102B both are E-Series kits, but the model number determines which specific engine and drive combinations they fit. When a customer needs an E-Series hub kit, always confirm the correct RBX model number against the engine application chart at rubexprops.com before recommending one over the other. This kit is most commonly needed when a customer is rebuilding a Rubex E-Series propeller after a prop strike, or building a new Rubex setup from scratch. Because the Rubex system separates the hub from the housing, customers only need to replace the housing if the blades are damaged the hub is reusable in most cases. Always check whether the hub is intact before recommending a full propeller replacement.