Volvo Penta – Engine Hose – 942754

The Volvo Penta 942754 is a genuine OEM hose used in select Volvo Penta marine engine assemblies where the parts diagram calls for this specific part number. This hose is commonly associated with utility connections in engine-mounted systems such as charge-air, cooling, or related fluid/air routing assemblies, depending on the exact engine model and diagram location.

Key Features

• Genuine Volvo Penta OEM hose
• Volvo Penta part number: 942754
• Factory original component, not an aftermarket substitute
• Used in select Volvo Penta marine engine installations
• Commonly referenced for engine system routing applications where the diagram calls for 942754
• Replaces earlier Volvo Penta hose numbers 979652 and 996189
• Best matched by Volvo Penta model, serial number, and parts diagram location

Application Compatibility

This hose is used on select Volvo Penta marine engine applications where the factory parts diagram specifies part number 942754.

Because Volvo Penta hoses vary by bend shape, molded length, inside diameter, connection angle, and system location, compatibility should be confirmed against the exact engine model and diagram callout before ordering.

Serial Number Fitment Notice

Confirm fitment by Volvo Penta engine model, serial number, and the correct engine system schematic. This hose should be used only where the diagram calls for 942754, especially if it is being matched to a charge air cooler, cooling system, or other engine-mounted connection where hose shape and length are critical.

When This Part Needs Replacement

Replace this hose if it is cracked, swollen, soft, oil-soaked, heat-hardened, abraded, leaking, or no longer clamps securely at the connection points. It should also be replaced during related component service if the hose has been disturbed, stretched, or shows signs of age or heat cycling.

Installation Notes

Compare the new hose to the removed hose before installation, including bend orientation, length, and end diameter. Inspect the mating fittings, clamps, cooler necks, housing outlets, and surrounding brackets before reassembly. Replace worn clamps if they no longer provide even tension. Follow the Volvo Penta service manual for the correct routing and clamp placement for the specific engine assembly.

Alternate/Superseded Part Numbers

• Current Volvo Penta Part Number: 942754
• Superseded / Replaced Volvo Penta Numbers: 979652, 996189

Parts Desk Insight

Volvo Penta molded hoses should be matched by part number rather than by general diameter alone. Even a small difference in bend angle or hose length can create poor clamp alignment, rubbing against nearby components, or premature hose failure in a high-heat engine compartment.