Volvo Penta Hex Socket Screw 60111167

Volvo Penta Hex Socket Screw 60111167

Genuine Volvo Penta 30 mm hex socket screw used in selected engine cooling and fuel-system assemblies. Part 60111167 replaces earlier Volvo Penta screw 959223.

Compatible Applications

• D6-280 variants
• D6-310 variants
• D6-330 variants
• D6-350 variants
• D6-370 variants
• D6-400 variants
• D6-435 variants
• D6-300A-G high-pressure fuel-pump assembly
• Selected D8 applications in the TAD840, TAD841, TAD850, TAD851, TAD853, TAD870, and TAD880 families where the parts diagram specifies 60111167

This fastener appears in several different assemblies. Confirm the engine model, serial number, and parts-diagram position before ordering.

Part Details

• Part number: 60111167
• Brand: Volvo Penta
• Product type: Hex socket screw
• Published length: 30 mm (1.18 in)
• Replaces: 959223
• Confirmed systems: Coolant pump and high-pressure fuel pump
• D6 diagram position: Item 11 in applicable coolant-pump and fuel-system diagrams

Replacement Guidance

Replace the screw if the internal hex is rounded, the threads or shank are damaged, corrosion is significant, or the applicable Volvo Penta procedure identifies the fastener as non-reusable. Inspect removed fasteners carefully before reassembly.

Installation Notes

Use the torque specification and installation procedure for the exact assembly being serviced. Do not apply a generic torque based only on the screw’s 30 mm length, because the thread specification, strength class, and installation requirements must match the original fastener.

Technical FAQ

Does 60111167 replace 959223?
Yes. Volvo Penta replacement references identify 60111167 as the replacement for 959223.

Is every visually similar 30 mm socket screw interchangeable?
No. Confirm the full part number and application because thread and strength requirements can differ.

Where is it shown in applicable D6 diagrams?
It appears as item 11 in applicable coolant-pump and high-pressure fuel-pump assemblies.

Parts Desk Insights

Best use case: Replacing the specified fastener during service of a compatible D6 or D8 coolant-pump or fuel-pump assembly.

Most common mistake: Matching only the length or installation location. Use the exact part number and diagram because similar-looking screws may have different threads or strength ratings.

Sizing and fitment: The published length is 30 mm. Confirm the engine model, serial number, diagram position, and original part number before installation.